|
|
|
|
|
We have a comprehensive ability of development and upgrade on hardware and software, We have reached the following improvements, and will provide upgrade services for customers.
|
|
|
1.PULSING TOOL LIFTING
Up parameter, short tool lift, controlled by ten digits.
1) Compared to the same previous params of tool lifting, a 15% processing time is increased, and a 30% speed is improved when processing the bone positon.
2) More continuous discharging
3) The smaller DN parameter can be used under special circumstance, the processing efficiency is not affectted.
|
|
 |
|
|
|
2.LOW CURRENT PROCESSING, MORE STABLE Servo algorithm is improved, and the processing efficiency of the range of 0.5A ~ 3A is improved by 10%.
3.FINE PROCESSING SPEED
The fine processing speed of C825 and C810 is improved by 20%。
4.CUSTOM SERVO VOLTAGE
The original set of stalls is from 0 to 9. In order to solve the software problem that the servo stall gap is too big, the actual servo voltage which can be setted by customers is from 11 to 200.
|
|
|
Test Cases
|
|
The test resluts have the following performance improvements which are very stable.
|